-
Ignition Coil Mako Marelli (for points), Fiat Spider & X1/9 – (SKU 22-1360) $68.00
Mako Marelli Ignition Coil for points cars. Does NOT work with electronic ignition! Fits: Fiat 124 1968-78 Fiat X1/9 1974-78
-
Window Handle Trim Ring Black, Fiat 124/2000 & X1/9 – (SKU 50-7072) $2.38
Fits: FIAT 124/2000 Spider – 1968-85 ALL Fiat X1/9 – 1974-88 (not OE) Manual window handle BLACK trim ring.
-
BRAIDED STAINLESS REAR BRAKE HOSE KIT, FIAT X1/9 – (SKU 05-0509) $60.00
For use with Prima brake kits, which already supply stainless front brake hoses. This kit includes the 2 rear brake lines at the calipers.
-
Hand Brake Switch, X1/9 all years – (SKU 06-0670) $5.58
Fits: X1/9 1971-88 Hand Brake Switch
-
Washer Reservoir Pump, Fiat 124 & X1/9 – (SKU 88-9670) $35.30
Fits: Fiat 124 Spider Coupe 1968-74 Fiat X1/9 1974 Pump fits all cars if converted to aftermarket set up.
-
Washer Reservoir Bag w/ Pump, Fiat 124 & X1/9 – (SKU 88-9649) $40.70
Fits: Fiat 124/2000 Spider 1975-79 Fiat X1/9 1975-79 Lancia Beta & Scorpion 1975-78 Windshield Washer Bag with pump
-
Washer Reservoir Bag, Fiat 124 & X1/9 – (SKU 88-9362) $33.90
Fits: Fiat 124/2000 Spider 1968-74 Fiat X1/9 1974 Windshield Washer Bag without pump – for cars with separate pump
-
Wiper Blade 13″ (sold each) – (SKU 88-5387) $16.00
Fits: Fiat 124 Spider 1968-78 Alfa GTV 1969-1974. 13″ Wiper Blades – SOLD INDIVIDUALLY BOSCH aerodynamic balanced beam design provides even wiping- even at high speeds. Sold Each.
-
Wiper Blade 15″ (sold each) – (SKU 88-5383) $16.00
Fits: Fiat Spider 2000 & Pininfarina Spider 1979-85 Fiat X1/9 1974-88 15″ Wiper Blades – SOLD INDIVIDUALLY BOSCH aerodynamic balanced beam design provides even wiping- even at high speeds. Sold Each.
-
43mm Abarth Red Center Cap, Set of 4 – (SKU 85-0324) $53.20
Set of 4. Center Cap for Cromodora wheels with 43mm center hole. Fits CD-30. Silver scorpion on red background. Fits Lancia Beta and Scorpion alloy wheels with 43mm center hole.
-
Back-up Light Switch, X1/9 & 128 ALL – (SKU 76-5341) $14.78
Fits: Fiat X1/9 & 128 – ALL Back-up Light Switch (Reverse Light Switch) – no harness
-
Shift Linkage, X1/9 – (SKU 76-1656) $12.95
Reduces sloppy vague shifting X1/9 1974-78 & 1981-88
-
Shift Linkage Hardware Kit – (SKU 76-1655) $8.19
Complete with nut, bolt & spacer for attaching linkage (76-1656) to your shift rod
-
Sleeve 5th Gear, Fiat 124/2000 – (SKU 75-9383) $153.00
5th Gear Sleeve Fits: Fiat X1/9 5-Speeds ALL Fiat 124 Spider 5-Speeds ALL
-
Sleeve 1st & 2nd, X1/9 1979-88 – (SKU 75-9330) $117.00
1st & 2nd Sleeve – X1/9, Strada & Bertone 1979-88 (need 2)
-
Sleeve 3rd & 4th, X1/9 1979-88 – (SKU 75-9310) $103.00
Fits: Fiat X1/9, Strada & Bertone 1979-88 (need 2) 3rd & 4th Sleeve
-
Reverse Idler Gear X1/9 (Early) – (SKU 75-8399) $58.30
Reverse Idler Gear – X1/9 (to spares 149270; 16mm ID; 31 teeth)
-
5th Gear on Main Shaft, X1/9 (Early) – (SKU 75-8384) $201.00
Fits: Fiat X1/9 (to spares 147744 – 44 teeth) 5th Gear on Main Shaft
-
Shift Fork 3rd & 4th, X1/9 5-speed – (SKU 75-8382) $70.70
Shift Fork 3rd and 4th – X1/9 5-speed
-
Shift Fork 5th & Reverse, X1/9 5-speed – (SKU 75-8374) $91.00
Fits: Fiat X1/9 5 speed Shift Fork 5th Reverse
-
Shift Fork 1/2, X1/9 5-speed – (SKU 75-8364) $48.70
Shift Fork for 1st and 2nd Fits: Fiat X1/9 5-speed
-
3rd Gear, Fiat X1/9 – 1979-80 – (SKU 75-8362) $133.00
3rd Gear Fits: Fiat X 1/9 (1979-80 – 32 teeth)
-
1st Gear Early, Fiat X1/9 – (SKU 75-8352) $129.00
1st Gear Fits: Fiat X1/9 (to spares 145857 – 43 teeth)
-
3rd Gear, Fiat X1/9 – 1981-84 – (SKU 75-8351) $183.00
3rd Gear Fits: Fiat X1/9 (1981-84 to spares 147744 – 57 teeth)
-
5th Gear on Lay Shaft, Fiat X1/9 – 1981-84 – (SKU 75-8347) $66.70
5th Gear on Lay Shaft Fits: Fiat X1/9 (after Nov 1980 to spares 147744 – 51 teeth)
-
5th Gear on Lay Shaft, X1/9 1971-1980 – (SKU 75-8325) $58.50
Fits: Fiat X1/9 (to Nov. 1980) 5th Gear on Lay Shaft, non-splined – 51 teeth)
-
4th Gear, Fiat X1/9 – 1979-80 – (SKU 75-8322) $65.70
4th Gear Fits: Fiat X1/9 (1979-80; 49 teeth; 74.7mm OD)
-
2nd Gear, X1/9 – (SKU 75-8319) $176.00
2nd Gear – X1/9 5-speed (38 teeth)
-
4th Gear, Fiat X1/9 -1981-84 – (SKU 75-8307) $141.00
4th Gear Fits: Fiat X1/9 (1981-84 to spares 147744 – 61 teeth; 74.1mm OD)
-
Synchro 1st & 2nd, X1/9 1979-88 – (SKU 75-7391) $41.70
Fits: Fiat X1/9, Strada & Bertone 1979-88 (need 2) 1st and 2nd
-
Synchro 3rd & 4th, X1/9 1979-88 – (SKU 75-7378) $29.30
Fits: Fiat X1/9, Strada & Bertone 1979-88 (need 2) 3rd & 4th Synchro
-
Synchro 5th Gear, Fiat 124 & X1/9 – (SKU 75-7340) $77.00
Synchro 5th gear Fits: Fiat 124 Spider 1968-85 Fiat X1/9 Bertone 1979-88
-
Input Shaft Nut, X1/9 5-speed – (SKU 75-6337) $8.51
Fits: Fiat X1/9 (5-speed) Input Shaft Nut
-
Transmission Gasket Set, Fiat SOHC 4 Speed – (SKU 40-9367) $26.80
4-speed transmission gasket set Fits: X 19 and 128 1968-79 (with seals)
-
Transmission Gasket Set, Fiat SOHC 5 Speed – (SKU 40-9308) $28.90
5-speed transmission gasket set Fits: X1/9 & Strada 1979-88 (with seals)
-
Input Shaft Bearing Rear, Fiat X1/9 (5 Speed) – (SKU 02-7313) $118.00
Rear Input Shaft Bearing – X1/9 (5-Speed)
-
Clutch Alignment Tool, X1/9 – (SKU 65-5641) $3.25
Fits: Fiat X1/9, 128 & Strada ALL Clutch Alignment Tool
-
Stud 8mm x 1.25 x 50mm (10 pack) – (SKU 57-0686) $17.72
8mm x 50mm – 1.25 thread **Pack of 10 studs Intake manifold to head
-
Stud 8mm x 1.25 x 55mm (10 pack) – (SKU 57-0655) $17.72
8mm x 55mm – 1.25 thread **Pack of 10 studs Some manifold to head
-
Stud 8mm x 1.25 x 40mm (10 pack) – (SKU 57-0652) $17.72
8mm x 40mm – 1.25 thread Most exhaust manifolds
-
Stud 8mm X 1.25 x 35mm (10 pack) – (SKU 57-0635) $17.72
8mm x 35mm – 1.25 thread **Pack of 10 studs Most down pipes – check you old studs for length
-
Nut 8mm x 1.25 (25 pack) – (SKU 57-0611) $10.03
Regular Nut 8mm x 1.25 (13MM head) ** Pack of 25 Nuts
-
Lock Washer 8MM ID (25 pack) – (SKU 57-0387) $5.91
Lock Washer 8MM inside diameter ** Pack of 25 washers
-
Flywheel Bolts 10MM (6 pack) – (SKU 57-0370) $14.19
Fits: Fiat 124 1968-77 X1/9 ALL 10MM Flywheel bolts **Pack of 6 bolts
-
Flat Washer 8MM ID (25 pack) – (SKU 57-0320) $5.37
Flat Washer with 8MM inside diameter **Pack of 25 washers
-
Nut Brass 8mm x 1.25 (6 pack) – (SKU 27-0350) $10.68
Exhaust Nut Brass 8mm X 1.25 (6 pack) Works great for exhaust manifold/header to cylinder head, catalytic convert & manifold to downpipe
-
Lug Bolt for Steel Wheels, Fiat – (SKU 85-7365) $3.53
27mm thread length. 124 Coupe, Sedan and Spider 1968-1978. Will fit some X1/9s.
-
Tie Rod Ends Outer, X1/9, 1982-88 – (SKU 62-9375) $32.90
Pair of outer Tie Rod ends Fits: X1/9 1982-88
-
Inner Tie-rod Ends, Fiat X1/9 1982-88 – (SKU 62-9374) $37.90
Inner Tie-rod end Sold as a Pair Fits: Fiat/Bertone X1/9 10/82-88
-
Inner Tie-rod Pair, X1/9 1974-82 – (SKU 62-9336) $37.90
Fits: X1/9 1974-10/82 128 & Yugo Inner Tie-rod sold pair
-
Tie Rod Ends Outer, Fiat X1/9 1974-82 – (SKU 62-9335) $34.80
A Pair of outer Tie Rod Ends Fits:Fiat X1/9 1974-09/1982
-
Rack Outer Bushing, Fiat X1/9 – (SKU 62-8380) $9.38
Left Side Outer bushing for rack Fits: Fiat X1/9 ALL
-
Rack and Pinion Steering, X1/9 1971-82 – (SKU 62-8379) $175.00
Fits: Fiat 128 & X1/9 1971-10/82 New Steering Rack LEFT HAND DRIVE CARS
-
Rack and Pinion Steering, X1/9 1982-88 – (SKU 62-8344) $175.00
Fits: Fiat X1/9 10/82-88 Complete New Steering Rack LEFT HAND DRIVE CARS
-
Steering Rack Bushing, X1/9, 128 – (SKU 62-8331) $5.63
Steering Rack Bushings Fits: X1/9 & 128
-
Strut Rear, X1/9 1979-88 – (SKU 62-7395) $100.00
X1/9 1979-1988 Complete low pressure KYB Gas Strut Assembly.
-
Strut Front, X1/9 1974-88 – (SKU 62-7331) $110.00
X1/9 1974-1988 Complete KYB low pressure Strut Assembly.
-
Shift Linkage/Transmission, X1/9 – (SKU 60-6376) $17.66
Fits: X1/9 ALL Shift Linkage/Transmission Seal
-
Transmission Input Shaft Seal, X1/9 – (SKU 60-6300) $6.24
Fits: Fiat 128, X1/9 & Strada 1971-88 Transmission Input Shaft Seal
-
Crankshaft Front Seal, Fiat & Lancia 1968-88 – (SKU 60-4640) $6.50
Fits: 56 x 40 x 7 mm Fiat 124, 2000, 131, Brava & Pininfarina 1968-85 Fiat X1/9, 128 & Strada 1971-88 Lancia Beta & Scorpion 1974-82 Crankshaft seal front seal
Parts for FIAT X1/9 x
