Sale!

NEW Billet Cam SOHC 40-85, Fiat X1/9 – (SKU 14-SOHC-3)

, , ,
1 review|1 answered question

Original price was: $176.00.Current price is: $80.00.

NEW Billet Racing Performance Camshaft

VICK AUTOSPORTS EXCLUSIVE

Racing Performance Cam is a very powerful camshaft. The engine should have other engine modifications, like higher compression and a larger single, or dual carburators.

***Should not be used on injected cars without modifications.***

*Industry Standard SPECS:

Degrees Duration – 242 @ .050 inch

Lift Inches – .396

*Old-Fashioned Fiat Aftermarket SPECS: not modern industry standard

Valve Timing – 40-85

Degrees Duration – 305

Lift MM – 10.4

Degrees Overlap – 80

Valve Clearance Inches – .014(intake) .014(exhaust)

*NOTE: When replacing any cam in any car it is to be expected that you will need to measure and replace shims as necessary.*

1 review for NEW Billet Cam SOHC 40-85, Fiat X1/9 – (SKU 14-SOHC-3)

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-1 of 1 review
  1. Avatar photo

    I was recently supplied one of these cams by one of my customers to fit in his car. it dialled in beautifully and all lobes were very accurate with there indexing. it is fitted to an series one X19 with a 1500 with 10.5:1 compression and a single 40mm dcnf and 4/2/1 extractors. great idle quality very broad power range and a pleasure to drive. I highly recommend this cam for an appropriately modified engine.

    (0) (0)
Add a review
You must be logged in to post a review Log In

Q & A

was wondering if this was a regrind, and if so, could you tell me how much I could get away with shaving of the cam box to avoid really thick shims or lash caps? Thanks! Kevin Cozzo asked on April 8, 2024

Kevin,

As the listing clearly states these are NEW cams not regrinds. Yes the lobes are different but they are MADE that way not reground that way.
We 100% are AGAINST ANY SHAVED CAM BOX!!! Do the build right the first time not wrong as you go.
1. Don't over cut your valves (like Fiat did from the factory)
2. There is NOTHING wrong with a lash cap
3. There is NOTHING wrong with a 5.20mm shim, unless you are running a race car.

We repeat for everyone that will ever read this... DO NOT SHAVE YOUR CAM TOWERS!

Thanks
Vick Autosports

Matt Phillips answered on April 9, 2024 store manager
(1) (0)

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Make Model Year
Make Model Year
Bertone X1/9 1983
Bertone X1/9 1984
Bertone X1/9 1985
Bertone X1/9 1986
Bertone X1/9 1987
Bertone X1/9 1988
Bertone X1/9 1989
FIAT 128 Sedan / Coupe / Familiare 1971
FIAT 128 Sedan / Coupe / Familiare 1972
FIAT 128 Sedan / Coupe / Familiare 1973
FIAT 128 Sedan / Coupe / Familiare 1974
FIAT 128 Sedan / Coupe / Familiare 1975
FIAT 128 Sedan / Coupe / Familiare 1976
FIAT 128 Sedan / Coupe / Familiare 1977
FIAT 128 Sedan / Coupe / Familiare 1978
FIAT 128 Sedan / Coupe / Familiare 1979
FIAT 128 Sedan / Coupe / Familiare 1980
FIAT Strada 1979
FIAT Strada 1980
FIAT Strada 1981
FIAT Strada 1982
FIAT X1/9 1974
FIAT X1/9 1975
FIAT X1/9 1976
FIAT X1/9 1977
FIAT X1/9 1978
FIAT X1/9 1979
FIAT X1/9 1980
FIAT X1/9 1981
FIAT X1/9 1982
Shopping Cart